Teradek Bolt 500 XT HD SDI Wireless Video Sender
Standard kit includes:
HD Transmitter and Receiver
Uncompressed, almost zero latency
SDI In/ Out
D-Tap or 4 pin hi-rose power
Includes cables and ball head mount
Daily rate: £60 +VAT
Standard kit includes:
HD Transmitter and Receiver
Uncompressed, almost zero latency
SDI In/ Out
D-Tap or 4 pin hi-rose power
Includes cables and ball head mount
Daily rate: £60 +VAT
Standard kit includes:
HD Transmitter and Receiver
Uncompressed, almost zero latency
SDI In/ Out
D-Tap or 4 pin hi-rose power
Includes cables and ball head mount
Daily rate: £60 +VAT
-
Teradek Bolt LT 500 3G-SDI Wireless Transmitter and Receiver (TER-BOLT-925LT). The Bolt LT takes Teradek’s industry-leading wireless performance and packages it into an affordable, streamlined series of zero-delay wireless video systems. The LT line is available in 500ft. or 1000ft. max-range models, with the LT 500 offering external antennas on the transmitter for enhanced wireless performance.
Not only lighter, but smaller too, the Bolt LT is the essential, no-frills high performance wireless video system. Each transmitter includes a single 3G-SDI or HDMI input with matching looping output, while the receiver includes a single 3G-SDI or HDMI output. Several ⅜” and ¼”-20 mounting points allow Bolt LT to mount seamlessly to any camera rig and integrated bi-directional Sony L-series or Canon LP-E6 pass-through battery plates allow you to power your system far more easily than before.
-
Bolt LT 500 Transmitter
Video
Video Inputs SD/HD/3G-SDI (75 Ohm BNC)
Video Outputs HD/SD/3G-SDI Loop-out (75 Ohm BNC)
Sdi Ancillary Data Support supports metadata, timecode, and start/stop flags from certain camera manufacturers. Please refer to
https://support.teradek.com/hc/en-us/articles/217446087
Colour Sampling SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
Delay TX To RX <0.001sec (without format conversion)
Supported Resolutions
Supported Resolutions 1080p 23.98/24/25/29.97/30/50/59.94/60
1080psf23.98/24/25/29.97/30
1080i50/59.94/60
720p50/59.94/60
480p59.94/576p50 (via HDMI ports only)
480i(NTSC)/576i(PAL)
Video Processing
Video Compression Visually lossless
Colour Correction CDL/1024 1D LUT (supports 10-bit color)
33x33x33 3D LUT (supports 10-bit color)
Audio Processing
Audio Compression 48kHz 24-bit PCM
Inputs
Audio Input Embedded Audio Input
Physical
Dimensions 2.4 x 6.6 x 10.15 cm (0.95 x 2.6 x 4.47 inches)
Weight 0.226 kg (0.49 lbs)
Construction Milled Aluminum(Chassis) and regulation- compliant PCB
Mountability Multiple mounting options with M3 and 1/4″ holes
3/8″ ARRI style accessory mount
Interfaces
Http None
Configuration Interfaces None
Switches On/Off and Reset Switch
Desktop App Feature-rich Bolt Manager Application for OSX & Windows
USB Interface Functionality Upgrade via Mini-USB
Network
Wireless Non-DFS Frequencies:
US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
EU & JP: 5.19 ~ 5.23 GHz
DFS Frequencies:
US: 5.27 ~ 5.55 GHz and 5.67 GHz
EU & JP: 5.27 ~ 5.67 GHz
Rf Channel Selection Auto only (NOT configurable)
Encryption AES-128
Rf Power 17dBm EIRP
Range Up to 500ft line of sight
Unicast Multicast Unicast / Multicast
Noise Rejection Can coexist with WiFi and 5GHz cordless phones
Power
Power Input 2-Pin Connector 7-28 VDC
Battery None
Nominal Power Consumption 7.3 Watts (Measured at 1080p60)
Environmental
Operating Temperature 0 ~ 40 deg-C
Bolt LT 500 Receiver
Video
Video Outputs SD/HD/3G-SDI (75 Ohm BNC)
USB 3.0 micro B receptacle
Sdi Ancillary Data Support supports metadata, timecode, and start/stop flags from certain camera manufacturers. Please refer to:
https://support.teradek.com/hc/en-us/articles/217446087
Colour Sampling SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
Delay TX To RX <0.001sec (without format conversion)
Supported Resolutions
Supported Resolutions 1080p 23.98/24/25/29.97/30/50/59.94/60
1080psf23.98/24/25/29.97/30
1080i50/59.94/60
720p50/59.94/60
480p59.94/576p50 (via HDMI ports only)
480i(NTSC)/576i(PAL)
Video Processing
Video Compression Visually lossless
Test Pattern Generator Support Yes
Colour Correction CDL/1024 1D LUT (supports 10-bit color)
33x33x33 3D LUT (supports 10-bit color)
Audio Processing
Audio Processing 48kHz 24-bit PCM
Inputs
Audio Input Embedded Audio Input
Physical
Dimensions 2.5 x 8.5 x 11.4 cm (1 x 3.4 x 4.5 inches)
Weight 0.288 kg (0.63 lbs)
Construction Milled Aluminum(Chassis) and regulation- compliant PCB
Plastic Cap
Mountability Multiple mounting options with M3 and 1/4″ holes
Interfaces
HTTP None
Configuration Interfaces No OLED Screen
There is an OSD that appears on the Video Output which can be controlled with the Menu Joystick
Switches On/Off and Reset Switch
Desktop App Feature-rich Bolt Manager Application for OSX & Windows
USBInterface Functionality Upgrade via Mini-USB
Network
Wireless Non-DFS Frequencies:
US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
EU & JP: 5.19 ~ 5.23 GHz
DFS Frequencies:
US: 5.27 ~ 5.55 GHz and 5.67 GHz
EU & JP: 5.27 ~ 5.67 GHz
Rf Channel Selection Auto only (NOT configurable)
Encryption AES-128
Rf Power 15dBm EIRP
Range Up to 500ft line of sight
Unicast Multicast Unicast / Multicast
Noise Rejection Can coexist with WiFi and 5GHz cordless phones
Power
Power Input 2-Pin Connector 7-17 VDC
Battery None
Nominal Power Consumption 9 Watts (Measured at 1080p60)
Environmental
Operating Temperature 0 ~ 40 deg-C
